Icom id- rp2, Инструкция по эксплуатации, Страница: 30 / 56

27
5
DRIVER INSTALLATIONS
2001 NEW
Checking the COM port
■
Microsoft D ® Windows ® 8.1
Start Windows.
q
• When opening the Device Manager, log in as the admin -
istrator.
Connect the PC and the ID-RP2C [SERVICE 1]
w
connector with the USB cable.
Move the mouse pointer to the bottom left corner of
e
the desktop.
Move the mouse pointer
around here.
Right-click the Microsoft icon, and then click “Device
r
Manager.”
• The “Device Manager” window appears.
w
Click
q
Right-click
Double-click “Ports (COM&LPT)” on the “Device
t
Manager” screen to check the COM port number.
• When the driver is completely installed, “ICOM ID-RP2C
SERVICE 1 (COM M )” is displayed. The screen shows
the USB serial COM port number “4.”
Double-click
• The COM port number is displayed instead of “
M
.”
If the repeater has two COM ports, two COM port
numbers are displayed.
• Depending on the PC environment, the COM port
number may differ.
• If “!” or “×” is displayed on the “Device Manager”
screen, the driver may not be properly installed. In
this case, first uninstall the USB driver, then rein-
stall it.
After the driver installation, check the driver availability
and the COM port number.
In this section, checking the COM port number of the
ID-RP2C [SERVICE 1] connector is used for instruc-
tion example.