Icom id- rp2, Инструкция по эксплуатации

Страница: 15 / 56

12
4
INSTALLING AND CONNECTING
2001 NEW
Pole
(48.6–89.1 mm)
Pole clamp
Stopper
t
Attach the pole between the elevation angle bracket
and the pole clamp, that is removed in steps
q
, as
illustrated at left.
• Tighten the two bolts within an even torque.
• Use the stopper of the elevation angle bracket when
installing the antenna at the top edge of the pole.
Support arm
Element
y
Attach the support arms between element arm and
parabolic reflector, and attach the antenna element
to the element arm.
NOTE:
The “V” stamps on the antenna element
must be face up.