Icom ID-880H Скачать руководство пользователя страница 20

Страница: 20 / 35

PANEL DESCRIPTION

MEMORY CHANNEL NUMBER INDICATORS

Shows the selected memory channel number.

(p. 61)

Shows the selected bank initial.

(p. 64)

“C0” or “C1” appears when the call channel is selected.

(p. 72)

DR (D-STAR REPEATER) INDICATOR

(p. 118)

Appears when DR mode is selected.

AUTO POWER OFF INDICATOR

(p. 118)

Appears when the auto power OFF function is in use.

GPS INDICATOR

(p. 126)

Appears while GPS function* is in use.

• GPS indicator can be turned OFF in GPS.SET mode. (p.???).

*Available when GPS receiver is connected.

MEMORY INDICATOR

(p. 61)

Appears when memory mode is selected.

PRIORITY INDICATOR

(p. 81)

Appears while priority watch is activated, blinks while pri-
ority watch is paused.

SKIP INDICATOR

(p. 79)

“

” appears when the displayed memory channel is

speciﬁed as a skip channel.

“

” appears when the displayed frequency is speci-

ﬁed as a program skip frequency.

WEATHER ALERT INDICATOR

(p. 123)

“WX” appears when the weather alert function is in use.

*Available with the USA version only.

TONE INDICATOR

• During FM/FM-N mode operation:

“T” appears while the repeater tone is in use.

(p. 30)

“TSQL” appears while the tone squelch function is in
use.

(p. 86)

“TSQL-R” appears while the reverse tone squelch

function is in use.

(p. 87)

“DTCS” appears while the DTCS squelch function is
in use.

(p. 86)

“DTCS-R” appears while the reverse DTCS squelch
function is in use.

(p. 87)

“

” appears with the “TSQL” or “DTCS” indicator

while the pocket beep function is in use.

(pgs. 86, 91)

• During DV mode operation:

“DSQL” appears while the digital call sign squelch

function is in use.

(p. 91)

“CSQL” appears while the digital code squelch

function is in use.

(p. 91)

“

” appears with the “DSQL”* or “C SQL” indicator

while the pocket beep function is in use.

(pgs. 86, 91)

DUPLEX INDICATORS

(p. 30)

“DUP” appears when plus duplex, “DUP–” appears when
minus duplex (repeater) operation is selected.

KEY LOCK INDICATOR

(p. 19)

Appears when the key lock function is activated.

Содержание ID-880H




































Результаты поиска

Содержание ID-880H

Отзывы:

Бренды по названию

Популярные бренды

Icom ID-880H, Инструкция по эксплуатации

Результаты поиска

Содержание ID-880H

Отзывы:

Бренды по названию

Популярные бренды