![background image](http://html2.mh-extra.com/html/icom/id-800h/id-800h_firmware-update_3784351007.webp)
5
1
DIGITAL MODE OPERATION
New2001
■
Digital voice mode operation
q
Set the desired frequency in VFO mode.
(Instruction man-
ual; pgs. 11, 12)
• Select output power, if desired. (Instruction manual; p. 19)
w
Push and hold
[BAND•MODE]
for 1 sec. to enter the mode
selection condition.
e
Rotate
[DIAL]
to select “DV,” then push
[BAND•MODE]
to
set the digital mode.
• “DV” appears.
r
Push
[SET•LOCK]
to enter the call sign set mode.
• Rotate
[DIAL]
to select “CALLS,” if necessary.
t
Push
[SET•LOCK]
or
[S.MW•MW]
several times until “My-
CALL” appears.
y
Rotate
[DIAL]
to select the desired your own call sign
channel
(if you have programmed several call signs)
, then push
[SET•LOCK]
for 1 sec. to set the call sign and return “My-
CALL.”
• “M” indication stops blinking.
u
Push
[SET•LOCK]
once to select “UrCALL.”
i
Select the desired call sign as “When sending a CQ
(see
p. 6)
” or “When calling the desired station
(see p. 7)
.”
o
Push and hold
[PTT]
to transmit and speak into the micro-
phone at normal voice level.
• Transmit indicator appears and the RF meter shows the output
power level.
!0
Release
[PTT]
to return to receive.
• The other station call sign will be received.
• Received call signs are stored into the received call record auto-
matically.
z
Set the desired frequency in VFO mode.
(Instruc-
tion manual; pgs. 11, 12)
x
Push and hold
[BAND]
for 1 sec. to enter the
mode selection condition.
c
Push
[
Y
Y
]
or
[
Z
Z
]
to select “DV,” then push
[BAND]
to set the digital mode.
• “DV” appears.
v
Push
[
SET
B(D-OFF)]
to enter call sign set mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “CALLS,” if necessary.
b
Push
[
SET
B(D-OFF)]
or
[
ENT
C(T-OFF)]
several
times until “MyCALL” appears.
n
Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired own call
sign channel, if you have programmed several
call signs, then push
[
SET
B(D-OFF)]
for 1 sec. to
set the call sign and return “MyCALL.”
• “M” indication stops blinking.
m
Push
[
SET
B(D-OFF)]
once to select “UrCALL.”
,
Select the desired call sign as “When sending a
CQ
(see p. 6)
” or “When calling the desired station
(see p. 7)
.”
.
Push and hold
[PTT]
to transmit and speak into
the microphone at normal voice level.
• Transmit indication appears and the RF meter shows
the output power.
⁄0
Release
[PTT]
to return to receive.
✔
For your information
See page 14 for the set call sign confirmation.
SET
B
ID-800H_FirmupInfo.qxd 05.10.27 9:08 Page 5 (1,1)