21
1
DIGITAL MODE OPERATION
New2001
D
D
RX message indication
When a call with a message is received, the message can be
stored into the RX message record.
The message is cleared once turning power OFF, or over-
written when another message is received.
q
When the call with a message is received, the digital mes-
sage indicator blinks.
w
Push
[SET•LOCK]
to enter message set mode.
• Rotate
[DIAL]
to select “MESSAG,” if necessary.
e
Push
[SET•LOCK]
or
[S.MW•MW]
several times until “RX-
MSG” or “RX-CAL” appears.
• When “RX-CAL” is displayed, rotate
[DIAL]
to select “RX-MSG.”
• When “RX-CAL” is selected, the station call sign, that the mes-
sage is send, is displayed at the next step.
Push
[SET•LOCK]
or
[S.MW•MW]
to display last 6-digit or first
6-digit of the call sign, respectively, in this case.
r
Push
[BAND•MODE]
to display the message, then push
[SET•LOCK]
or
[S.MW•MW]
several times to scroll the
message.
t
Push
[M/CALL•PRIO]
,
[TONE•T-SCAN•BK]
,
[LOW•DUP]
or
[MONI•DTMF•EMR]
to exit the message set mode.
z
When the call with a message is received, the
digital message indicator blinks.
x
Push
[
SET
B (D-OFF)]
to enter message set
mode.
• Push
[
Y
Y
]
or
[
Z
Z
]
to select “MESSAG” if necessary.
c
Push
[
SET
B(D-OFF)]
or
[
ENT
C (T-OFF)]
several
times to select “RX-MSG” or “RX-CAL.”
• When “RX-CAL” is displayed, push
[
Y
Y
]
or
[
Z
Z
]
to se-
lect “RX-MSG,”
v
Push
[BAND]
to display the message.
b
Push
[
SET
B(D-OFF)]
or
[
ENT
C (T-OFF)]
to scroll
the message.
n
Push
[
CLR
A(MW)]
to exit the message set mode.
For your information
When “Auto RX message Display (RMD)”
(instruction manual;
p. 89)
is set to ON, the received message will be displayed
and scrolls automatically.
SET
B
Scroll indicator appears
ID-800H_FirmupInfo.qxd 05.10.27 9:08 Page 21 (1,1)