4
FM RADIO OPERATION
4-2
D
Description
You can listen to FM Radio broadcasts�
While using the Dualwatch function, you can still listen
to the FM Radio on the pop up window�
Up to 500 FM Radio Memory channels can be
separately stored in the 26 groups for easy memory
management�
You can standby listening to FM Radio� Also, the
transceiver has the exclusive FM Radio mode, where
only the FM Radio functions� In this mode, the other
functions are disabled�
TIP:
The FM Radio Memory channel contents,
described in this manual, may differ from your
transceiver’s preloaded contents�
The frequency range for the FM Radio
FM: 76�0 MHz* to 108�0 MHz
* The usable frequency range differs, depending on the
transceiver’s version�
Basic operation
D
Turning ON the FM Radio
1� Push [QUICK]�
2� Select “<<FM Radio ON>>�”
• Returns to the standby screen, and the FM RADIO
window is displayed�
• “ ” is displayed�
Displayed when the FM
Radio is ON�
TIP:
To turn OFF the FM Radio
Push [QUICK], and then select “<<FM Radio OFF>>�”
To listen to the FM Radio while monitoring the
A/B bands
Push [CLR] to close the FM RADIO window�
• You can standby listening to FM Radio�
L
To open the FM RADIO window again, push [QUICK],
and select “<<FM Radio>>�”
NOTE:
If you turn ON the Band Scope function while
using the Dualwatch function, the FM Radio audio
output may be interrupted due to the AF Output
(DUAL/AIR Band) function�
In that case, set “Auto Mute” to OFF, or set “AF
Output (DUAL/AIR Band)” to OFF�
L
When “AF Output (DUAL/AIR Band)” is set to ON, the
received audio is momentarily heard during a sweep,
and you will know that a signal is received without
looking at the display�
([MENU] > FM RADIO > FM Radio Set >
Auto Mute
)
([MENU] > SET > Scope >
AF Output (DUAL/AIR Band)
)