Icom IC-T90A Скачать руководство пользователя страница 39

Страница: 39 / 100

BASIC OPERATION

■

1750 Hz tone

Some European repeaters require a 1750 Hz tone to be ac-
cessed. For such European repeaters, perform the following.

• This tone can be use as a ‘Call signal’ in countries out of Europe.

Push [• DTMF.M] for 1 sec. to select DTMF memory.

Rotate [DIAL] counter-clockwise until “T-CALL” appears.

Push [VFO] to exit DTMF memory.

Set the receive frequency (repeater output frequency).

Set the shift direction of the transmit frequency. (–DUP or
DUP; see p. 31 for details.)

While pushing [PTT], push [SQL] for 1 to 2 sec. to transmit
a 1750 Hz tone burst signal.

• If “OFF” appears, check the offset frequency or shift direction.

(p. 31)

• The displayed frequency automatically changes to the transmit

frequency (repeater input frequency).

Push and hold [PTT] to transmit.

Release [PTT] to receive.

Push and hold [SQL] to check whether the other station’s
transmit signal can be received directly or not.

BASIC OPERA

TION

IC-T90A_IM.qxd 02.6.6 08:44 AM Page 37 (1,1)

Содержание IC-T90A





































































































Результаты поиска

Содержание IC-T90A

Отзывы:

Icom IC-T90A, Инструкция по эксплуатации, Страница: 39 / 100

Результаты поиска

Содержание IC-T90A

Отзывы: