Icom IC-T90A Скачать руководство пользователя страница 19

Страница: 19 / 100

BATTERY CHARGING

■

Regular charging

Prior to using the transceiver for the first time, the battery
pack must be fully charged for optimum life and operation.

CAUTION:

To avoid damage to the transceiver, turn the
transceiver OFF while charging.

• Recommended temperature range for charging:

+32°F to +95°F; 0°C to +35°C

• Use the wall charger* (BC-110AR/D/DR) only.

NEVER

use

another manufactures’ charger.

* Not supplied with some versions.

• An optional cable CP-19 (for 12 V cigarette lighter socket)

can be used instead of the AC adapters of the above charg-
ers.

Battery indicators

The battery indicators blink while charging but do not indicate
the power condition.

“CHG_F” appears when the charging is completed. Discon-
nect the wall charger in this case.

Attach the battery pack to the transceiver.

Be sure to turn the transceiver power OFF.

Connect the AC adapter* (BC-110AR/D/DR) as shown
below.

* Not supplied with some versions.

Remove any cables from the [DC11V] jack.

• Charging period:

15 hours (w/BP-217)

TTER

CHARGING

IC-T90A

with BP-217

BC-110AR/D/DR

to AC outlet

CP-19

(optional)

to
DC power
jack

to a 12 V
cigarette lighter
socket

IC-T90A_IM.qxd 02.6.6 08:44 AM Page 17 (1,1)

Содержание IC-T90A





































































































Результаты поиска

Содержание IC-T90A

Отзывы:

Похожие инструкции для IC-T90A

Бренды по названию

Популярные бренды

Icom IC-T90A, Инструкция по эксплуатации

Результаты поиска

Содержание IC-T90A

Отзывы:

Похожие инструкции для IC-T90A

Бренды по названию

Популярные бренды