manualshive.com logo in svg

Icom IC-T10, Руководство для продвинутых пользователей, Страница: 6 / 48

Поделиться
Скачать
Icom IC-T10 Скачать руководство пользователя страница 6

1

BATTERY CHARGING

1-3

Charging the battery pack

 

D

Using the BC-213 

rapid charger

Before using the transceiver for the first time, the 

battery pack must be fully charged for optimum life 
and operation.

Power 
adapter*
(BC-242)

Battery 
pack
(BP-280)

Turn OFF

The CP-23L (for a 
12 V cigarette lighter 
socket) can be used 
instead of the power 
adapter.

Charging indicator
Lights orange: 

Charging

Lights green: 

Fully charged

*  May not be supplied, or the shape may be different, 

depending on the transceiver version.

Charging note

 

•

CAUTION: DO NOT

 use a battery pack or charger 

that are not manufactured or approved by Icom.

 

•

BE SURE

 to turn OFF the transceiver. When the 

transceiver’s power cannot be turned OFF because 
of the battery exhaustion, detach the battery pack 
from the transceiver. Then charge the battery pack 
by itself.

 

• If the charging indicator blinks orange, there may 

be a problem with the battery pack or charger. 
Contact your dealer if you have problems charging 
a new battery pack.

Charging time:

  

Approximately 4 hours for the BP-280

Содержание IC-T10

















































Отзывы:

Нет отзывов