background image

4

REPEATER AND DUPLEX OPERATION

4-4

Duplex operation

The duplex operation shifts the transmit frequency 

up or down from the receive frequency by an offset 

amount.

 

D

Setting the frequency offset

1.  Push [SET] to enter the Set mode.

 

• A Set mode item is displayed.

2.  Repeatedly push [SET] to select “OFFSEt.”
  

3.  Rotate [DIAL] to set the frequency offset.

 

• “DUP” blinks.

 

L

Set to between 0.000 and 20.000 (MHz).

 

L

Changes in the tuning step selected in the Set mode.

  

  

4.  Push [V/M/C] to exit the Set mode.

UHF default

VHF default

 

D

Setting the duplex direction

1.  Push [SET] to enter the Set mode.

 

• A Set mode item is displayed.

2.  Repeatedly push [SET] to select “dUP.”
  

3.  Rotate [DIAL] to set a duplex direction.

 

• OFF: The receive and transmit frequencies are the 

same.

 

• –:

The transmit frequency shifts down from the 

receive frequency by the offset amount.

 

• +:

The transmit frequency shifts up from the 

receive frequency by the offset amount.

  

  

4.  Push [V/M/C] to exit the Set mode.

 

• “DUP” or “DUP-” is displayed when the duplex 

direction is set.

  

+

 

D

Duplex operation

1.   Hold down [MONI] to listen to the transmit 

frequency to check whether another station is 
transmitting on it or not.

 

The frequency shifts by the offset amount.

2.   Operate in the same way as a simplex call, 

alternately transmit and receive.

NOTE for the USA version:

The Duplex mode is automatically canceled 
when the Auto Repeater function (p. 4-5) is 
ON, and the operating frequency is set out of the 
repeater output frequency range.

Содержание IC-T10

















































Отзывы: