31
9
SET MODE
• Scan resume
This item sets the scan resume function ON or OFF.
• “on” scan resumes 10 sec. after stopping on a signal (or
2 sec. after a signal disappears)
• “oF” scan does not resume after stopping on a signal.
See p. 25 for scanning details.
• Scan speed
The receiver has 2 speeds for scanning, high and low.
See p. 25 for scanning details.
• AM mode noise blanker
The noise blanker for AM mode can be turned ON
and OFF.
• CW pitch control
The received CW audio pitch and monitored CW
audio can be adjusted to suit your preferences (300
to 900 Hz) without changing the operating frequency.
• The CW audio pitch can be adjusted in 10 Hz steps.
• The CW audio pitch is displayed in 10 Hz steps. ‘60’ indi-
cates 600 Hz CW audio pitch.
• Blank channel indication
This item sets the blank channel indication ON or
OFF.
• “on” blank memory channels are skipped and can not be
selected.
• “oF” all memory channels can be selected.
• S-AM mode detector
The S-AM mode can be detected with the standard
AM detector automatically when the signal level is
poor.
• “En” (Enable) The signal is detected with the standard
AM detector when the signal level is poor.
• “SA” (S-AM)
The signal is always detected with S-AM.
