Icom IC-R1500, Инструкция по эксплуатации

Страница: 33 / 56

28
6
SCAN OPERATION
6
■
Skip scan
D
Skip channel/frequency setting
You can set the selected memory channel as a skip channel
which is skipped during memory skip scan. In addition, it can
be set as a skip channel for both memory skip scan and fre-
quency skip scan. These are useful to speed up the scan in-
terval.
q
Select a memory channel.
➥
Push [MR•SKIP] to select memory mode, then rotate
[DIAL] to select the desired memory channel to be a
skip channel.
• “
!
” and memory channel number appear.
w
Push and hold [MR•SKIP] for 1 sec. several times to set
the skip condition.
• (no indication) : The channel is scanned during scan.
•
~
: The channel is skipped during scan.
•
P
~
: The channel is skipped during scan and the pro-
grammed frequency is skipped during VFO scan,
such as programmed scan.
D
Skip scan setting [
q
Push [SET•LOCK] to enter set mode.
w
Push [SET•LOCK] or [S.MW•MW] several times until
“PSC” appears.
e
Rotate [DIAL] to toggle the skip scan function ON and
OFF.
r
Push [TS•MODE] or any switch below the display to exit
set mode.
t
Then start the scan to activate the skip scan (memory skip
scan or frequency skip scan).
[DIAL]
[S.MW•MW]
[SET•LOCK]
[TS•MODE]
The display shows that
memory channel 16 is
set as a skip channel.
[MR•SKIP]