Icom IC-M92D, Инструкция по эксплуатации

Страница: 25 / 80

18
6
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Starting a scan
■
Set the scan type (Priority or Normal scan), WX Alert function
and Scan Timer function in advance, using the se mode.
To select a scan type:
Select the scan type between Normal scan and Priority scan.
Push
q
[MENU].
Push
w
[ Y ]
or
[ Z ]
to select “Radio Settings”, then push
[EN-
TER] .
Select “
e
Scan Type”, then push [ENTER] .
r
Select “Normal Scan” or “Priority Scan” and push [ENTER]
to program.
t
Select “BACK” to return to the previous page, or simply
select “EXIT” to return to the main menu screen.
• “SCAN” appears if “Normal Scan” is selected, and “SCAN 16”
apppears if “Priority Scan” is selected as show below.
To scan:
Select “SCAN” and push on the soft key to start or stop scan-
ning.
• Pushing [PTT] also stops the scan.
• When a signal is received, scan pauses until the signal disappears
or resumes after pausing for 5 seconds according to the Scan Timer
setting.
• While scanning, push [ Y ] or [ Z ] to check which channels have
been set as TAG channels or to change the scanning direction.