Icom IC-M73 Скачать руководство пользователя | Manualshive

Страница: 40 / 56

background image

32

9

BATTERY CHARGING

New2001

•

R

WARNING! NEVER

put the battery in a microwave

oven, high-pressure container, or in an induction heating
cooker. This could cause overheating, a fire, or cause the
battery to rupture.

•

CAUTION:

Always use the battery within the specified

temperature range for the transceiver*

and the battery

itself (–20˚C to +60˚C; –4˚F to +140˚F).

* EXP/USA

: –20˚C to +60˚C; –4˚F to +140˚F

CHN/EUR/FRG/HOL/UK : –15˚C to +55˚C; +5˚F to +131˚F

AUS

: –10˚C to +55˚C; +14˚F to +131˚F

Using the battery out of its specified temperature range

will reduce the battery’s performance and battery life.
Please note that the specified temperature range of the
battery may exceed that of the transceiver. In such cases,
the transceiver may not work properly because it is out of
its operating temperature range.

•

CAUTION:

Shorter battery life could occur if the battery

is left fully charged, completely discharged, or in an ex-
cessive temperature environment (above +50˚C; +122˚F)
for an extended period of time. If the battery must be
left unused for a long time, it must be detached from the
radio after discharging. You may use the battery until the
remaining capacity is about half, then keep it safely in a
cool dry place with the temperature range as below;

–20˚C to +50˚C (–4˚F to +122˚F)

(within a month)

–20˚C to +35˚C (–4˚F to +95˚F)

(within three months)

–20˚C to +20˚C (–4˚F to +68˚F)

(within a year)

D

Charging caution

•

R

DANGER! NEVER

charge the battery pack in areas

with extremely high temperatures, such as near fires or
stoves, inside a sun-heated car, or in direct sunlight. In
such environments, the safety/protection circuit in the
battery will activate, causing the battery to stop charg-
ing.

•

R

WARNING! DO NOT

charge or leave the battery in the

battery charger beyond the specified time for charging.
If the battery is not completely charged by the specified
time, stop charging and remove the battery from the bat-
tery charger. Continuing to charge the battery beyond
the specified time limit may cause a fire, overheating, or
the battery may rupture.

•

R

WARNING! NEVER

insert the battery and transceiver

(battery attached to the transceiver) into the charger if it
is wet or soiled. This could corrode the battery charger
terminals or damage the charger. The charger is not wa-
terproof.

•

CAUTION: DO NOT

charge the battery outside of the

specified temperature range: +10˚C to +40˚C (+50˚F to
+104˚F). Icom recommends charging the battery at +20˚C
(+68˚F). The battery may heat up or rupture if charged out
of the specified temperature range. Additionally, battery
performance or battery life may be reduced.

«
...
38
39
40
41
42
...
»

Содержание IC-M73

























































Отзывы:

Нет отзывов

Похожие инструкции для IC-M73

Badradio SR-300

Бренд: Hama Страницы: 3

Бренд: Team Страницы: 33

Бренд: Team Страницы: 10

Бренд: Jensen Страницы: 18

Бренд: Numaxes Страницы: 32

Бренд: La Crosse Technology Страницы: 10

Бренд: Maxon Страницы: 9

Бренд: Vertex Standard Страницы: 44

Бренд: PRESIDENT Страницы: 8

Бренд: Vertex Standard Страницы: 80

Бренд: Radio Shack Страницы: 4

Бренд: Radioddity Страницы: 53

Бренд: Radio Shack Страницы: 16

Бренд: Radio Shack Страницы: 24

Бренд: Radio Shack Страницы: 4

Бренд: Radio Shack Страницы: 2

Бренд: Goodmans Страницы: 18

Бренд: Icom Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды