Icom IC-M73 страница 3 Скачать руководство пользователя

Страница: 3 / 56

New2001

short the terminals of the battery pack.

Use and charge only specified Icom battery packs with

Icom radios or Icom chargers. Only Icom battery packs are

tested and approved for use with Icom radios or charged with

Icom chargers. Using third-party or counterfeit battery packs

or chargers may cause smoke, fire, or cause the battery to

burst.

connect the transceiver to an AC outlet. This may pose a

fire hazard or result in an electric shock.

hold the transceiver so that the antenna is closer than 2.5

cm (1 inch) from exposed parts of the body, especially the face

or eyes, while transmitting. The transceiver will perform best if

the microphone is 5 to 10 cm (2 to 4 inches) away from the lips

and the transceiver is vertical.

connect the transceiver to a power source other than the prod-

ucts specified by Icom. Such a connection will ruin the trans-

ceiver.

the flexible antenna and battery pack are securely attached to

the transceiver, and that the antenna and battery pack are dry

before attachment. Exposing the inside of the transceiver to

water will result in serious damage to the transceiver.

The transceiver meets IPX8 requirements for waterproof pro-

tection. However, once the transceiver has been dropped, wa-

terproof protection cannot be guaranteed because of possible

damage to the transceiver's case or the waterproof seal.

use or place the transceiver in direct sunlight or in areas with

temperatures below –20°C (–4°F) or above +60°C (+140°F) for

the EXP/USA versions, below –15°C (+5°F) or above +55°C

(+131°F) for the CHN/EUR/FRG/HOL/UK versions, and below

–10°C (+14°F) or above +55°C (+131°F) for the AUS versions.

use harsh solvents such as benzine or alcohol when cleaning,

as they will damage the transceiver surfaces.

push [PTT] when not actually intending to transmit.

modify the transceiver. The transceiver warranty does not

cover any problems caused by unauthorized modification.

operate the transceiver near unshielded electrical blasting

caps or in an explosive atmosphere.the transceiver out of the

reach of children.

the transceiver at least 0.9 meter (3.0 feet) away from your

vessel’s magnetic navigation compass.

PRECAUTIONS

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United Kingdom,
Germany, France, Spain, Russia and/or other countries.

Содержание IC-M73

























































Результаты поиска

Содержание IC-M73

Отзывы:

Похожие инструкции для IC-M73

Бренды по названию

Популярные бренды

Icom IC-M73, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M73

Отзывы:

Похожие инструкции для IC-M73

Бренды по названию

Популярные бренды