background image

27

8

DSC OPERATION

New2001

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

 

Entering the position and time

A Distress call should include the ship’s 

position and time. 

When a GPS receiver compatible with 

the NMEA 0183 format is connected, 

position and UTC time are automatically 

included.

If no GPS data is received, you should 

manually enter your position (latitude 

and longitude) and Universal Time 

Coordinated (UTC) time.

•  Manual entry is disabled when a valid 

GPS data is received.

•  Manually entered position and time 

are valid for only 23.5 hours.

1.  Push [MENU].

2.   Select “Position Input,” then push 

[ENT].

 

(DSC Settings > 

Position Input

)

3. 

 Enter your position

s latitude.

 

 To select ʻNʼ (North latitude) or ʻSʼ (South 

latitude), push any keypad key when the 

cursor is on the ‘N’ or ‘S’ position.

4. 

After entering, push [Finish] 

.

5. 

 Enter your position

s longitude.

 

 

L

 To select W (West longitude) or E (East 

longitude), push any keypad key when 

the cursor is on the ‘W’ or ‘E’ position.

6. 

After entering, push [Finish] 

.

Push

Enter

Cursor moves

Set ‘W’ (West) or ‘E’ (East)

Rotate

Push

(any key)

Push

Enter

Cursor moves

Set ‘N’ (North) or ‘S’ (South)

Rotate

Push

(any key)

Содержание iC-M605





























































































































Отзывы: