Icom iC-M605 Скачать руководство пользователя страница 106

Страница: 106 / 124

CONNECTIONS AND MAINTENANCE

New2001

■

Mounting the transceiver

The universal mounting bracket supplied with your

transceiver enables overhead or flat mounting.

• Mount the transceiver securely with the 5 supplied (M5 × 20)

screws to a surface that is more than 10 mm thick and can

support more than 5 kg.

• Mount the transceiver so its face is at 90° to your line of

sight when operating.

CAUTION:

Keep the transceiver and microphone at least

1 meter (3.3 feet) away from your vessel’s magnetic

navigation compass.

NOTE:

• Check the installation angle. The function display may not

be easy to read at some angles.

• When mounting the transceiver on the place that is prone

to strong vibration, use the supplied sponges between the

transceiver and mounting bracket to reduce the vibration.

Sponges reduce the vibration effects.

See NOTE shown to the left.

Sponge*

Содержание iC-M605





























































































































Результаты поиска

Содержание iC-M605

Отзывы:

Icom iC-M605, Инструкция по эксплуатации, Страница: 106 / 124

Результаты поиска

Содержание iC-M605

Отзывы: