background image

58

13

HM-127 REMOTE-CONTROL MICROPHONE

Lock functions

The Lock function electronically locks keys and switches to
prevent accidental changes and function access from the mi-
crophone.

• All keys, switches and controllers on the transceiver are functional.

D

D

Activating the Lock function

While pushing 

[

[

H/L

H/L

]

]

, push

[

[

SQL

SQL

]

]

(

(

L)

L)

to turn the Lock

function ON or OFF.

• “

” appears.

• Only 

[

[

PWR

PWR

]

]

[

[

PTT

PTT

]

]

[

[

H/L

H/L

]

]

,

[

[

SQL

SQL

]

]

(

(

L)

L)

[

[

VOL

VOL

]

]

+

[

[

Y

Y

Y

Y

]

]

/

[

[

Z

Z

Z

Z

]

]

and  

[

[

SQL

SQL

]

]

+

[

[

Y

Y

Y

Y

]

]

/

[

[

Z

Z

Z

Z

]

]

are func-

tional.

D

D

Activating the All key lock function

While pushing 

[

[

H/L

H/L

]

]

, turn the

power ON by pushing 

[

[

PWR

PWR

]

]

to turn the All key lock function
ON or OFF.

• “

” blinks.

• Only 

[

[

PWR

PWR

]

]

and 

[

[

PTT

PTT

]

]

are

functional.

Display backlighting

The function display and keys can be backlit for better visibil-
ity under low light conditions. The backlighting condition can
also be adjusted independently from the transceiver.

q

Push 

[

[

VOL

VOL

]

]

(

(

)

)

for 1 sec.

to enter Backlight adjusting
mode.

• “

” with the number of the

backlight level appears in the
channel comment indicator.

w

Push 

[

[

Y

Y

Y

Y

]

]

/

[

[

Z

Z

Z

Z

]

]

to adjust the

backlight level.

• The backlight level is adjustable

between 0 (light OFF) and 7
(brightest).

F

or your reference:

Pushing 

[

[

Y

Y

Y

Y

]

]

/

[

[

Z

Z

Z

Z

]

]

, while 

[H/L]

[H/L]

is pushed, also adjusts back-

light level.

• No backlight level indication is available.

DIM

MONI

MONI

Appears when the lock
function is in use. 

Appears while in the 
Backlight adjustment 
mode. 

Blinks when the all lock
function is in use. 

Содержание IC-M502A











































































Отзывы: