Icom IC-M423 Скачать руководство пользователя страница 74

Страница: 74 / 110

DSC OPERATION

■

Received Call log (Continued)

Other messages

Push [LOG] to enter “RCVD CALL LOG” in the DSC CALLS
menu, or you can enter it through the Menu screen.





➪



DSC Calls



➪



Received Call Log



(Push [MENU].) (Rotate Dial, then push [ENT].)

Push [

]/[

] to select “Others,” then push [ENT].

• The messages other than the Distress are stored in “Others.”

• “

” is displayed when there are unread DSC messages.

• “

” is displayed when there are no unread DSC messages.

  • No icon is displayed when there are no DSC messages.
  • Push [BACK] to return to the previous screen.
  • Push [EXIT] to return to the normal operating mode.

Push [

]/[

] to select the desired item, then push [ENT].

• The message in the unopened file has not been read.

Rotate Dial to scroll the DSC message contents.

• The stored message has various information, depending on the

DSC call type.

Rotate

To delete the displayed DSC message, push [DEL].

• The confirmation screen is displayed, then push [OK] to delete.

Push [EXIT] to return to the normal operating mode.

Содержание IC-M423















































































































Результаты поиска

Содержание IC-M423

Отзывы:

Icom IC-M423, Инструкция по эксплуатации, Страница: 74 / 110

Результаты поиска

Содержание IC-M423

Отзывы: