Icom IC-M423 страница 16 Скачать руководство пользователя

Страница: 16 / 110

PANEL DESCRIPTION

■

Function display (Continued)

RT (Radio Telephone) ICON

(For only USA version transceivers.)

Displayed while in the Radio Telephone mode.

• The Radio Telephone mode is terminated if no operation occurs

during the preset of time.

• The icon is displayed if the “RT Indicator:” item in the RADIO

SET menu is set to “ON.” (p. 77)

LOW BATTERY ICON

Blinks when the battery voltage drops to approximately

10 V DC or less.

CHANNEL NUMBER READOUT

Shows the selected operating channel number.

CHANNEL NAME FIELD

The channel name is displayed, if entered. (p. 16)

KEY ICON

(p. 7)

Shows the preset function of the softkeys on the front panel.

TIME ZONE INDICATOR

➥

Shows the current time when GPS data is received, or
the time is manually entered.

• When the GPS current time is invalid, “??” will blink every

2 seconds instead of the current time. After 23.5 hours has
passed, “NO TIME” is displayed.

• “??” will blink every 2 seconds instead of the current time,

after 4 hours* have passed from when the time was manu-
ally entered. The manually entered time is held for only 23.5
hours, and after that, “NO TIME” is displayed.

*3 hours and 59 minutes for USA version.

➥

“LOCAL” is displayed when the offset time is set.

➥

“MNL” is displayed when the time is manually entered.

➥

“UTC” is displayed when the GGA, GLL or GNS GPS
sentence format is included in the GPS signal.

➥

The date information is displayed when the RMC GPS
sentence format is included in the GPS signal.

➥

“NO TIME” is displayed when no GPS receiver is con-
nected, and no time is manually entered.

NOTE for the IC-M423 and IC-M424:

These models do not come with a built-in GPS receiver.

Therefore an external GPS receiver needs to be con-

nected, or the time needs to be manually entered for
the time zone indicator to be displayed.

Содержание IC-M423















































































































Результаты поиска

Содержание IC-M423

Отзывы:

Похожие инструкции для IC-M423

Бренды по названию

Популярные бренды

Icom IC-M423, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M423

Отзывы:

Похожие инструкции для IC-M423

Бренды по названию

Популярные бренды