32
6
DSC OPERATION
New2001
n
Transmitting DSC calls (Continued)
D
Test call
Testing on the exclusive DSC distress and safety calling
channels should be avoided as much as possible by using
other methods. When testing on the distress/safety channel is
unavoidable, it should be indicated that these are test trans-
missions.
Normally the test call would require no further communica-
tions between the two stations involved.
q
Push
[MENU] to enter the DSC menu.
w
Push
[
s
] or [
t
] to select “TEST CALL,” and then push
[ENT].
Scrolls
e
Push
[
Y
] or [
Z
] to select a desired pre-programmed Indi-
vidual address or “MANUAL INPUT,” then push
[ENT].
• The ID code for the individual can be set in advance. (p. 14)
• When “MANUAL INPUT” is selected, set the 9-digit MMSI ID
code for the individual you wish to call with
[
Y
] or [
Z
]. (See
About Manual Inputting on page 22.)
Scrolls
r
After step
e
, Channel 70 is automatically selected and
“READY” appears in the channel comment display.
Push
The last digit
*This illustration describes with “MANUAL INPUT”
selection in step
e
.
t
Push
[ENT] to transmit the Test call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
Transmitting
y
After the Test call has been transmitted, return to normal
operation (before entering the DSC menu).
Scrolls
Содержание IC-M412
Страница 1: ...INSTRUCTION MANUAL iM412 VHF MARINE TRANSCEIVER ...
Страница 66: ...58 ...
Страница 67: ...59 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 MEMO ...