Icom IC-M411 Скачать руководство пользователя страница 7

Страница: 7 / 64

OPERATING RULES

PRIORITIES

• Read all rules and regulatons pertanng to prortes and

keep an up-to-date copy handy. Safety and Dstress calls
take prorty over all others.

• You must montor Channel 16 when you are not operatng

on another channel.

• False or fraudulent dstress sgnals are prohbted and pun-

shable by law.

PRIVACY

• Informaton overheard but not ntended for you cannot law-

fully be used n any way.

• Indecent or profane language s prohbted.

RADIO LICENSES

(1) SHIP STATION LICENSE

You must have a current rado staton lcense before usng
the transcever. It s unlawful to operate a shp staton whch
s not lcensed.

Inqure through your dealer or the approprate government
agency for a Shp-Radotelephone lcense applcaton. Ths
government-ssued lcense states the call sgn whch s your
craft’s dentficaton for rado purposes.

(2) OPERATOR’S LICENSE

A Restrcted Radotelephone Operator Permt s the lcense
most often held by small vessel rado operators when a rado
s not requred for safety purposes.

The Restrcted Radotelephone Operator Permt must be
posted or kept wth the operator. Only a lcensed rado op-
erator may operate a transcever.

However, non-lcensed ndvduals may talk over a trans-
cever f a lcensed operator starts, supervses, ends the call
and makes the necessary log entres.

Keep a copy of the current government rules and regulatons
handy.

Содержание IC-M411

































































Результаты поиска

Содержание IC-M411

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-M411, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M411

Отзывы:

Бренды по названию

Популярные бренды