Icom IC-F620, Инструкция по эксплуатации

Страница: 8 / 16

5
2
CONNECTION AND MAINTENANCE
■
Mounting the transceiver
The front panel can be inverted for correct viewing while leav-
ing the built-in speaker facing away from the mounting sur-
face.
D
Inverting the front panel
q
Unscrew the 2-side screws.
w
Detach the front panel forward from the transceiver.
e
Bend the flat cable between front panel and main unit as
shown in the following diagram.
r
Invert the transceiver 180 degrees clockwise as below.
t
Re-attach the front panel to the transceiver.
y
Tighten the 2 screws.
normal bend line
inverted
bend line
Flat cable orientation
to front panel
to main unit
CAUTION:
• NEVER rotate the transceiver more than 180
degrees.
• DO NOT bend the flat cable too hard. Damage may
occur.
• Be sure to bend the flat cable in the correct direc-
tion, before turning over (inverting) the transceiver.
IC-F610_F620_F621-2.qxd 04.3.17 3:51 PM Page 5 (1,1)