background image

13

2

BASIC OPERATION

2

 Emergency transmission

When [Emergency] is held down for the specified time pe-
riod*, the emergency signal is transmitted on the specified 
emergency channel once or repeatedly.
When no emergency channel is specified, the call is transmit-
ted on the operating channel.

The repeat emergency signal is automatically transmitted 
until you turn OFF the power.
Depending on the preprogramming, receiving a matching 
5-tone code cancels the transmission.

If you want to cancel the Emergency function, hold down 
[Emergency] for the pre-programmed time period again be-
fore transmitting the call.

If your transceiver is programmed for Silent operation, you 
can transmit emergency calls without the beep sounding and 
the LCD indication change.

  IMPORTANT:  It  is  recommended  to  set  an  emergency 

channel individually to provide the certain emergency call 
operation.

D

 

NOTES

Depending  on  the  preprogramming,  the  following  functions 
are automatically activated. Ask your dealer for details.

• Auto TX function

After the emergency call transmission, audio from the micro-
phone  is  automatically  transmitted  for  a  specified  time  pe-
riod.*

• The HM-148G or HM-152 hand microphone is required.

• Auto RX function

After the emergency call transmission, the transceiver stands 
by in the audible mode for the specified time period.*

*  Depending on the preprogramming. Ask your dealer for de-

tails.

 Encryption function

The encryption function provides private communication be-
tween stations while operating in the digital mode.

q

 Push [Encryption] to turn ON the encryption function.

  • “

” (Encryption icon) appears.

w

  Push [Encryption] again to turn OFF the encryption func-

tion.

  • “

” disappears.

Содержание IC-F5122D



























Отзывы: