45
5
IDAS OPERATION
■
Sending a Status message
Status message can be automatically transmitted.
The status message is transmitted when:
• The transceiver is turned ON or OFF
- Set the status message to be transmitted in ‘Power ON Status’
or ‘Power OFF Status’ item, respectively.
- Set the target station ID in ‘Power Status ID’.
• A voice message is sent.
- Set the ‘Send with Voice Call’ item to ‘Enable.’
- Set the status message to be transmitted in the ‘Send Status
Number’ item.
■
Sounding a Horn
An automatic honking function can be used if a horn is con-
nected to the D-Sub 25-pin connector of the transceiver.
When a status message is received, the transceiver honks
the vehicle’s horn for the specified time period to indicate a
status message is has been received.
This function is convenient when the operator is away from
the transceiver.
Ask your dealer or system operator, or refer to the IC-F5061/
F6061 series service manual for connection and setting de-
tails.
■
Connecting a Printer
When a printer is connected to the D-sub 25-pin of the trans-
ceiver, the received SDM content and the caller station ID can
be printed out.
Ask your dealer or system operator for connection details.
■
Encryption function
The encryption function enables voice scrambling, which pro-
vides private digital communication between stations.
q
Push
[Scrambler/Encryption]
to turn ON the encryption
function.
• “
” appears.
w
Push
[Scrambler/Encryption]
again to turn OFF the en-
cryption function.
• “
” disappears.
