43
5
IDAS OPERATION
D
Direct ID input
Depending on the presetting, you may be able to directly input
the desired ID. The optional HM-152T is required.
q
Push
[Digital Button]
to enter the Individual or Talkgroup
ID selection mode, then push the appropriate digit key,
[0]
to
[9]
, to input the desired ID (up to 5 digits).
• Push
[
M
]
to delete an input digit.
V O I C E
1 2 3 4 5
The entered Individual or Talkgroup ID
w
After inputting, push
[PTT]
to transmit to the station or talk-
group.
D
Transmitting an Emergency Call
When
[Emergency]
(described in the instruction manual) is held
down for a specified time period, the emergency signal (digital
command) is transmitted once or repeatedly* on the emergency
channel. When no emergency channel is specified, the signal is
transmitted on the operating channel.
* When the Repeat Cancel function is ON, the transceiver cancels
repeating after receiving an acknowledgement.
When the Repeat Cancel function is OFF, the transceiver repeats
calling according to the number of repeat cycles, even after receiv-
ing an acknowledgement.
This function is usable in transceivers whose revision number is 3.0
or later. Ask your dealer for details.
Individual or Talkgroup type of emergency calls can be pre-
set. If the call type is not preset, the default or selected call
type is used.
This function is usable in transceivers whose revision number
is 2.9 or later. Ask your dealer for details.
If you want to cancel the emergency call, hold down the key
again before transmitting the call.
The emergency call can be transmitted without a beep sound-
ing, and the LCD lighting, depending on the presetting. (Silent
operation)
The transceiver can also be programmed to keep the micro-
phone open during an emergency call, allowing monitoring of
the situation.
Ask your dealer for details.
