10
2
BASIC OPERATION
■
User Set mode
The User Set mode can be accessed with the ‘Power ON’
function. In this case, all set mode items are selectable.
The User Set mode allows you to set seldom-changed set-
tings, and you can “customize” the transceiver operation to
suit your preferences and operating style.
NOTE:
While in the User Set mode, [P0], [P2] and [P3]
activate regardless of the assigned key functions.
Entering the User Set mode:
q
Push
[ ]
to turn OFF the power.
w
While holding down [P1] and [P2], push
[ ]
to turn ON the
power.
• Hold down [P1] and [P2] continuously until it turn ON.
TX/RX
1
2
3
4
[P1] [P2]
[ ]
e
Hold down [P0] for 1 second to enter the User Set mode.
• To exit the User Set mode, hold down [P0] for 1 second again.
TX/RX
1
2
3
4
[P0]
r
Push [P0] several times to select the appropriate item,
then push [P2] or [P3] to set the desired level or setting.
• Selectable set mode items are
Backlight
,
Beep ON/OFF
,
Beep
Level, SQL Level
,
AF Min Level
,
Mic Gain
,
Horn
,
Signal Moni
and
Lone Worker
.
• The Channel indicator and Activated key indicator light to show
the selected item.
TX/RX
1
2
3
4
[P0]
[P2] [P3]
Channel indicator
Activated key
indicator
t
Hold down
[ ]
for 1 second to turn OFF the power, then
ON again to return the normal operating mode.
TX/RX
1
2
3
4
[ ]
The User Set mode can also be selected using a program-
mable key. Please refer to the [User Set Mode] section on
page 5 for instructions on how to use the key assigned to the
User Set mode.
[User Set Mode] can be used for the quick item selection. Set
“Enable” for the often used items with the CS-F3020/F5010/
F5020
cloning
software
.