Channel selection
■
There are several ways to select channels, and they may differ,
depending on your system set up.
To select a desired operating channel, do one of the following.
• Rotate [ROTARY SELECTOR].
• Push one of memory channel keys, [MR-CH 1] to [MR-CH 4].
• Push one of these keys, [Prio A], [Prio B], [Prio A (Rewrite)] and
[Prio B (Rewrite)].
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning ON the
power, the transceiver automatically starts scanning.
Scanning stops when a signal is detected.
13
3
BASIC OPERATION