8
2
PANEL DESCRIPTION
MEMORY CH 1/2/3/4 KEYS
“
CH1
” “
CH2
” “
CH3
” “
CH4
”
Push to select the memory channels 1 to 4 drectly.
MONI KEY
“
MON
”
➥
Push to mute and release the CTCSS (DTCS) or 2-tone
squelch mute. Open any squelch/deactvate any mute
whle pushng and holdng ths key. (LMR operaton only)
➥
Actvates one of (or two of) the followng functons on
each channel ndependently: (PMR operaton only)
• Push and hold to un-mute the channel (audo s emtted; ‘Aud-
ble’ condton).
• Push to mute the channel (sets to ‘Inaudble’ only).
• Push after the communcaton s finshed to send a ‘reset code’.
(5-tone/BIIS operaton only)
NOTE:
The un-mute condton (‘Audble’ condton) may
automatcally return to the mute condton (‘Inaudble‘
condton) after a specfied perod.
LIGHT KEY
“
LIGT
”
Push to turn the transcever’s backlght ON temporarly only
when the backlght functon s turned OFF n user set mode.
LOCK KEY
“
LOCK
”
➥
Push and hold for 1 sec. to electroncally lock all program-
mable keys except the followng:
[PTT], [Call] (ncl. Call A and Call B), [Mon(Aud)], [Lght],
[Emergency], [Survellance] and [Lone Worker].
➥
Push and hold for 1 sec. agan to turn the lock functon
OFF.
LONE WORKER KEY
“
LONE
”
Push to turn the Lone Worker functon ON or OFF.
• If the Lone Worker functon s actvated, the Emergency functon s
automatcally turned ON after the specfied tme perod has passed
wth no operaton s performed.
HIGH/LOW KEY
“
H/L
”
Push to select the transmt output power temporarly or per-
manently, dependng on the pre-settng.
• Ask your dealer for the output power level for each selecton.
C.TONE CH ENT KEY
“
TSEL
”
Push to enter the contnuous tone channel selecton mode.
Then select the desred tone frequency/code settng wth
[CH Up] or [CH Down]. After the selecton, push ths key
agan to set.
The selected channel remans set as the contnuous tone
channel untl another channel s desgnated as such.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
