20
6
SmarTrunk II
TM
OPERATION
D
D
Last number redial
*
1
Push [
M
], [
M
] to automatically redial the last number called.
• A high-pitched beep indicates that the number is accepted.
D
D
Turbo SpeeDial
To automatically dial a commonly used number with one push:
• Push one of the turbo SpeeDial keys.
D
D
Programming memory speed dial
q
Push and hold [
M
] until you hear a high-pitched beep.
w
Enter the memory location (0–9, A, B, C, D), the telephone or
subscriber number, then [1], [
M
] (or [3], [
M
] if for another sys-
tem subscriber).
• A high-pitched beep indicates successful programming.
• Memories [A]–[D] are used for the Turbo SpeeDial.
NOTE:
This function is available for the IC-F30GT/IC-F40GT
only.
D
D
Memory speed-dialling
*
2
To automatically dial a commonly used number from memory:
• Push [
M
] followed by the memory location (0–9).
D
D
Clear channel alerting
*
1
If all channels are busy, the transceiver automatically begins
searching for an open channel and beeps every ten seconds.
When two short beeps (low-pitched, then high-pitched) are
heard, a channel is available. Push [
M
], [
M
] immediately to redial
the last number.
D
D
Emergency call
*
2
Push [0], [
M
] to initiate an emergency call.
• Contact your Dealer for details.
IC-F30G series-5.qxd 05.2.21 14:35 Page 20 (1,1)
