19
6
SmarTrunk II
TM
OPERATION
‘
‘
Basic operation
These features are enabled by your Dealer or System operator and
may not be available in your system. Contact your Dealer for details.
Push the [Bank] switch one or more times to select a channel bank
for conventional channels or SmarTrunk II™ channels.
• Scanning starts when a channel bank for SmarTrunk II
TM
is selected.
D
D
PTT dispatch operation
*
1
q
Push [PTT] once (without dialling) to initiate a dispatch call.
w
Begin talking after you hear three beeps (one short, high-
pitched, two very-short, low-pitched).
e
Receiving a dispatch call is indicated by the same three-beep
sequence.
• It is not necessary to push [
M
] to answer a dispatch call.
D
D
System busy indication
If all channels are busy, three low beeps sound after you initiate
a call. Try the call again later.
D
D
Receiving a subscriber-to-subscriber call
*
1
When you hear ringing, push [
M
] to answer.
• For a group call, you hear a short ring followed by two short beeps.
You do not have to answer a group call to hear it over the air.
D
D
Receiving a landline-to-subscriber call
*
1
When you hear ringing, push [
M
] to answer.
• For a group call, you hear a short ring followed by two short beeps.
You do not have to answer a group call to hear it over the air.
D
D
Terminating a call
*
1
After completing a call, push [#] to disconnect (hang up).
IMPORTANT
: If one person in the conversation terminates a call,
all participants will be cut off.
IC-F30G series-5.qxd 05.2.21 14:35 Page 19 (1,1)
