12
3
BASIC OPERATION
3
■
User set mode
The User Set mode enables you to set the seldom changed
settings, and customize the transceiver operation to suit your
preferences and operating style.
Entering the user set mode:
q
Hold down [User Set Mode] for 1 second to enter the user
set mode.
w
Push [User Set Mode] one or more times to select the ap-
propriate item.
e
Push [CH Up] or [CH Down] to set the desired level or
condition.
•
Available set mode functions are
Backlight, Beep, Beep
Level, SQL Level, Mic Gain, Battery Voltage, Signal
Moni and Lone Worker.
r
Hold down [User Set Mode] for 1 second again to exit the
set mode.
Emergency Call
When [Emergency] is held down for the specified time peri-
od*, the emergency signal is transmitted once, or repeatedly,
on the specified emergency channel.
A repeat emergency signal is automatically transmitted until
the transceiver receives an acknowledgement signal, or you
turn OFF the transceiver power.
When no emergency channel is specified, the signal is trans-
mitted on the previously selected channel.
If you want to cancel the emergency call, hold down [Emer-
gency] again before transmitting the call.
If your transceiver is preset for Silent operation, you can
transmit an Emergency call without the beep sounding and
the LED indicator lighting.
IMPORTANT:
It is recommended to set an emergency
channel individually to provide the certain emergency call
operation.
* Depending on the presetting. Ask your dealer for details.
D
NOTES
Depending on the presetting, the following functions are au-
tomatically activated. Ask your dealer for details.
• Auto TX function
After the emergency call transmission, audio from the micro-
phone is automatically transmitted for a specified time period.*
• Auto RX function
After the emergency call transmission, the transceiver stands
by in the audible mode for the specified time period.*
