5
2
PANEL DESCRIPTION
■
Assignable function keys
The following functions can be assigned to
[Emer]
,
[Side1]
,
[Side2]
,
[Side3]
,
[P0]
,
[P1]
,
[P2]
and
[P3]
assignable func-
tion keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers setting.
CH UP AND DOWN KEYS
➥
Push to select an operating channel.
➥
Push to select a transmit code channel after pushing [TX
Code CH Select].
➥
Push to select a DTMF channel after pushing [DTMF Au-
todial].
➥
Push to select a scan group after holding down [Scan A
Start/Stop]/[Scan B Start/Stop] for 1 second.
SIREN KEY
Push to emit a siren.
ZONE KEY
Push this key, then push [CH Up] or [CH Down] to select the
desired zone.
What is “zone”?
— The desired channels are assigned
into a zone according to the intended use for grouping.
For example, ‘Staff A’ and ‘Staff B’ are assigned into a
“Business” zone, and ‘John’ and ‘Cindy’ are assigned into
a “Private” zone.
SCAN A KEY
➥
This key’s operation depends on the Power ON Scan set-
ting.
When the power ON scan function is turned OFF:
Push to start and cancel scanning operation. In case of
transmission during scan, scanning will be cancelled.
When the power ON scan function is turned ON:
Push to pause scanning, then resumes scanning after pass-
ing a specified time period. In case of transmission during
scan, scanning will be cancelled.
➥
Hold down this key for 1 second to indicate the scan group,
then push [CH Up] or [CH Down] to select the desired
group.
SCAN B KEY
➥
Push to start and cancel scanning operation. In case of
transmission during scan, scanning will be paused. Then
resumes scanning after passing a specified time period.
➥
Hold down this key for 1 second to indicate the scan group,
then push [CH Up] or [CH Down] to select the desired
group.
PRIO A/B KEYS
➥
Push to select Priority A or Priority B channel.
➥
Hold down [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1
second to reassign the operating channel to Priority A or
Priority B channel.
