- 2 -
- 3 -
D
Turning ON the transceiver
NOTE:
Before using the transceiver for the first time, the
battery pack must be fully charged for optimum life and
operation. See the BATTERY CHARGING section of this
sheet.
Rotate [VOL] to turn ON the transceiver.
D
Receiving and Transmitting
Receiving:
1. Select a channel.
L
Rotate [ROTARY SELECTOR], or push one of the Memory
channel keys, [MR-CH 1] to [MR-CH 4], to select a channel.
2. When receiving a call, rotate [VOL] to adjust the audio
output level to a comfortable listening level.
Transmitting:
CAUTION:
Attach an antenna before transmitting.
Transmitting without an antenna may damage the
transceiver.
1. Wait until the channel is clear to avoid interference.
2. Hold down [PTT] to transmit.
3. Release [PTT] to receive.
IMPORTANT:
To maximize the readability of your signal:
1. After pushing [PTT], pause briefly before you start
speaking.
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from
your mouth, then speak at your normal voice level.
BASIC OPERATION
BATTERY CHARGING
D
Using the BC-191 to rapidly charge the
BP-264
The BC-191 rapidly charges the BP-264
n
i
-
mh
battery
pack
.
L
Charging time for the BP-264: Approximately 2 hours
A power adapter (not supplied with some versions) or the
OPC-515L
dc
power
cable
/ CP-23L
cigarette
lighter
cable
is additionally required.
CAUTION: NEVER
connect the OPC-515L to a power
source using reverse polarity. This will ruin the battery
charger. (White line:
+
,
Black line:
_
)
Screws:
User supplied self tapping screw (M3.5 × at least 30 mm).
Using screws to secure the charger is recommended.
Charge indicator:
• Lights orange: While charging
• Lights green: Charging completed
D
Using the BC-192 to regularly charge
the BP-264
The BC-192 regularly charges the BP-264
n
i
-
mh
battery
pack
.
L
Charging time for the BP-264: Approximately 16 hours
(at 16 V)
A power adapter (not supplied with some versions) or the
OPC-515L
dc
power
cable
is additionally required.
CAUTION: NEVER
connect the OPC-515L to a power
source using reverse polarity. This will ruin the battery
charger. (White line:
+
,
Black line:
_
)
Screws:
User supplied self tapping screw (M3.5 × at least 30 mm).
Using screws to secure the charger is recommended.
Charge indicator:
Lights green while charging.
L
The charge indicator will not go out even after a battery
pack is fully charged.
Turn OFF
BATTERY CHARGING (Continued)
The BC-193 can rapidly charge the BP-265
l
i-ion
battery
pack
.
L
Charging time for the BP-265: Approximately 2.5 hours
A power adapter (not supplied with some versions) or the
OPC-515L
dc
power
cable
/ CP-23L
cigarette
lighter
cable
is additionally required.
CAUTION: NEVER
connect the OPC-515L to a power
source using reverse polarity. This will ruin the battery
charger. (White line:
+
,
Black line:
_
)
Screws:
User supplied self tapping screw (M3.5 × at least 30 mm)
Using screws to secure the charger is recommended.
Charge indicator:
• Lights orange: While charging
• Lights green: Charging completed
The BC-197 can rapidly charge up to 6 battery packs.
L
Charging time for the BP-264: Approximately 2 hours
L
Charging time for the BP-265: Approximately 2.5 hours
A power adapter (not supplied with some versions) or the
OPC-656
dc
power
cable
is additionally required.
CAUTION: NEVER
connect the OPC-656 to a power
source using reverse polarity. This will ruin the battery
charger. (Red line:
+
,
Black line:
_
)
Charge indicator:
Each indicator functions independently.
• Lights orange: While charging
• Lights green: Charging completed
Charger adapter:
There are 2 types for the IC-F3002 and the IC-F4002. One
is for Ni-MH batteries, and the other is for Li-ion batteries.
BE SURE to choose the suitable charger type. See the
OPTION section on page 4 of this sheet.
Battery pack Transceiver
+ battery pack
Screws
Charge indicator
Power adapter
( A different type, or no power adapter is supplied,
depending on the charger version.)
The optional
OPC-515L
(for a DC power source)
or the
CP-23L
(for a
12 V cigarette lighter
socket) can be used
instead of the power
adapter.
To an
AC outlet
Charge indicator
Power adapter
( A different type, or no power adapter is supplied,
depending on the charger version.)
Battery pack Transceiver
+ battery pack
The optional
OPC-515L
(for a DC power source)
can be used instead of
the power adapter.
Turn OFF
To an
AC outlet
Power adapter
( A different type, or no power adapter is supplied,
depending on the charger version.)
Battery pack Transceiver
+ battery pack
Screws
Charge indicator
The optional
OPC-515L
(for a DC power source)
or the
CP-23L
(for a
12 V cigarette lighter
socket) can be used
instead of the power
adapter.
Turn OFF
To an
AC outlet
Charge indicator
Charger adapter
To an
AC outlet
Power adapter
( A different type, or no
power adapter is supplied,
depending on the charger
version.)
OPC-656
( Connect to a DC power
source: 12 ~ 16 V, at least 7 A)
Turn OFF
Battery pack
Transceiver
+ battery pack
D
Using the BC-193 to rapidly charge the BP-265
D
Using the BC-197 to rapidly charge the BP-264 or BP-265