4
SETTINGS
12
Setting the squelch level
You can adjust the squelch level. The squelch circuit
mutes the received audio or noise signal, depending
on signal strength.
1. Rotate [VOL] to turn OFF the transceiver.
2. Set [Rotary Selector] to any channel other than
Channel 16.
3. While holding down [Upper], rotate [VOL] to turn
ON the transceiver and enter the Squelch Level
Adjustment mode.
• An opening beep sounds and the selected channel
number will be announced.
4. Push [Upper] to increase the squelch level (tight
squelch), or push [Lower] to decrease the squelch
level (loose squelch).
• A beep sounds after pushing [Upper] or [Lower].
An error beep sounds if you try to exceed the
adjustable range.
L
The adjustable range is 0 (loose squelch) to 9 (tight
squelch).
5. Rotate [VOL] to turn OFF the transceiver and exit
the Squelch Level Adjustment mode.
NOTE:
Turn ON the Beep function (p. 7) before
you start setting the squelch level.
[Rotary Selector]
[VOL]
[Lower]
[Upper]
Previous view