54
2
OPERATIVITÀ
1
2
3
4
I
6
7
8
9
10
11
12
13
14
15
16
■
Ricezione e trasmissione
• Ricezione
1) Selezionate il canale ruotando [COMMUTATORE ROTATIvO].
2) Quando ricevete una chiamata, regolate [vOL] su un
livello gradevole d'ascolto.
• Trasmissione
Per non interferire altre comunicazioni, attendete che il
canale sia libero.
1) Tenendo premuto il [PTT], parlate rivolti verso il microfono,
con un normale tono di voce.
2) Passate in ricezione rilasciando il [PTT].
NOTE:
Per dare al vostro segnale la massima comprensibilità:
1. Dopo aver premuto il [PTT], attendete un istante prima
d'iniziare a parlare.
2. Parlate rivolti verso il microfono, tenuto a circa 5 - 10 cm
dalla bocca, con un normale tono di voce.
■
Operatività "Call-Ring"
Invia ai membri del vostro gruppo il trillo di chiamata convenuto.
• Chiamare i membri del vostro gruppo con "Call-Ring"
1) Selezionate il canale operativo ed il subtono CTCSS
convenuto per tutto il vostro gruppo di ricetrasmettitori.
2) Tenete premuto per 1" [SU], per inviare il trillo di
chiamata convenuto a tutti i membri gruppo.
• Mentre si tiene premuto [SU], il ricetrasmettitore trilla.
• Lo stesso trillo sarà riprodotto in altoparlante nelle radio dei
membri vostro gruppo.
■
Operatività "Smart-Ring"
// Solo per canali analogici //
Questa operatività prevede la notifica a riscontro.
Ricevete conferma se la vostra chiamata ha raggiunto i
ricetrasmettitori, anche se gli operatori erano lontani da
questi.
Il ricetrasmettitore chiamato automaticamente invia a voi il
riconoscimento di chiamata.
1) Selezionate il canale operativo ed il subtono CTCSS
convenuto per tutto il vostro gruppo di ricetrasmettitori.
2) Premete [SU] per inviare la chiamata intelligente "Smart-
Ring".
• Ricevendo la risposta, il ricetrasmettitore trilla ogni 10" e
la spia LED lampeggia arancio.
- Spegnere la ricetrasmittente per far cessare i segnali
acustici ed il lampeggiare del LED.
• Quando non riceve il segnale di answer back (ACK),
la ricetrasmittente emette tre brevi segnali acustici di
failure.
3) Premete il [PTT] per conversare, cessa il trillo ed il
lampeggio.
NOTA:
questa funzionalità si può usare solo quando il
corrispondente ha impostato lo stesso subtono CTCSS e
ha selezionato lo steso canale operativo.