![background image](http://html1.mh-extra.com/html/bwi-eagle/air-eagle-sr-l-38-2000-n/air-eagle-sr-l-38-2000-n_product-information-bulletin_2836527001.webp)
PRODUCT INFORMATION
BULLETIN
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE
®
SR
2.4 GHz RF Receiver
MODEL 38-2000-N/C
DESCRIPTION
The A
IR
-E
AGLE
SR
is an RF system designed for short to medium range
wireless remote control of electrical apparatus in a variety of industrial
applications. Systems can consist of any number of receivers and
handheld or contact input transmitters working together. This receiver is
equipped with 4 independent relays that are capable of switching 5 amps
@ 120VAC or 30VDC. The relays are user programmable for momentary
or toggle/latching operation and can be directly interfaced with the
customer's equipment or P.L.C. Eight user selectable frequencies allow
multiple systems to be used in the same area. Capable of receiving
remote signals transmitted from up to 100 feet away (with the SR
transmitter) or up to 600 feet away (with the SR PLUS transmitter), the
Air-Eagle SR Receiver utilizes spread-spectrum technology and provides
the utmost security and reliability even in the noisiest RF environments.
APPROVALS
United States (FCC)
OUR-XBEEPRO
Canada (IC)
4214A-XBEEPRO
Europe (CE)
ETSI
INSTALLATION
DISCONNECT AC Power from all equipment before installation.
1.
Mount the A
IR
-E
AGLE
SR R
ECEIVER
in a convenient location.
2.
Install relay wiring to terminal strip.
3.
Install antenna onto antenna connector located on the right side on
the enclosure.
4.
Connect AC power to the proper terminals in your control circuit.
TERMINAL STRIP WIRING
1
N/O Relay #1
7
N/O Relay #3
13 120 VAC - (Neutral)
2
C Relay #1
8
C Relay #3
14 120 VAC - (Hot)
3
N/C Relay #1
9
N/C Relay #3
4
N/O Relay #2
10 N/O Relay #4
5
C Relay #2
11 C Relay #4
6
N/C Relay #2
12 N/C Relay #4
All relay contacts are shown in their de-energized state. When power is
applied to the unit the relays will energize. The relays will then de-energize
when a signal is received from the transmitter.
Dimensions (with mounting plate) 6.3” L x 4.8” W x 2.3” H
CONTROLS AND INDICATORS
.
LED1
Illuminated when power is applied to receiver
LED2
Illuminated when relay #1 is energized
LED3
Illuminated when relay #2 is energized
LED4
Illuminated when relay #3 is energized
LED5
Illuminated when relay #4 is energized
RF1
RF module that receives data from the remote
transmitter
REL1 thru REL4
Four SPDT output control relays
Summary of Contents for AIR-EAGLE SR L 38-2000-N
Page 3: ......