background image

3

Section 

2

PROGRAMMABLE KEY FUNCTIONS

Programmable key functions

You can assign the functions described below to [Top], 

[Upper], and [Lower] by using the CS-F29DR 

cloning

 

software

 (purchase separately). 

Ask your dealer for details.

Null

 

No function is assigned.

ZONE

 

Push to toggle the operating Zone.

  •  Each time the user pushes this key, the transceiver 

selects Zone 1, Zone 2, and then Zone 1 again.

SCAN

 

Push to start or pause a scan.

  •  When a scan is started with the Power ON Scan or the 

Automatic scan function, push this key to pause the 

scan. The paused scan resumes after a set time period.

 

 Hold down this key while a scan is paused, and 

then the channel is removed from the scan group.

  •  The removed channel is automatically added to the 

scan group again, after the scan is canceled.

MONI 

 

 While holding down this key, the C.Tone* mute 

is released, even if the received signal does not 

include a matching C.Tone*.

* CTCSS tone or DTCS code

LOCK

 

 Hold down to turn the Key Lock function ON or 

OFF.

  •  Even when the Key Lock function is ON, [PTT], [MONI], 

[LOCK], [CALL], [CLEAR], [SURVEILLANCE], and 

[SIREN]  are not locked.

CALL // only on a Digital channel //

 

 Push to make a call that includes a Common ID.

CLEAR // only on a Digital channel //

 

 Push to finish a communication by sending a clear 

down signal. After the other station receives the 

clear down signal, the transceiver automatically 

enters to the Stand-by mode.

BREAK // only on a Digital channel //

 

Hold down to send a Break-in request call.

  •  The Break-in request call announces to the other 

stations on the channel that the user wants to break into 

the current communication in the group. The transceiver 

waits for the current communication to end. After the 

communication ends, the transceiver automatically 

sends the call.

 

 While waiting, push this key to cancel the Break-in 

request call.

S-RING/C-RING 

// only on an Analog channel //

 

Push to make a Smart-Ring call.

// on both an Analog and a Digital channel //

 

Hold down to make a Call-Ring call.

NOTE: 

See the instruction manual that comes with 

the transceiver for the default settings of these keys.

[Rotary Selector]

[VOL]

[Lower]

[Upper]

[PTT]

[Top]

NOTE: 

Select the channels to be scanned by using  

CS-F29DR 

cloning

 

software

.

Содержание IC-F29DR
























Отзывы: