9
2
PANEL DESCRIPTION
■
LED indicator
The LED indicator indicates the status of various
parameters of the transceiver, as follows;
(Ref.; R=Red, G=Green, O=Orange)
R*
R*
TX Low BATT2
R*
R*
R*
R*
O
O O
G G
G G
G G
G G G G G G G G
R G R G R G R G R G R G R G R G
R O R O R O R O R O R O R O R O
G
G
G
Clone Err
Clone TX/RX
Low BATT1
Low BATT2
Busy
F/S Scan
Call LED Blink
Call LED ON
TX Low BATT1
R *
TX
• TX: Lights Red while transmitting a signal.
• RX: Lights Green while receiving a signal.
• Fast/Slow scan: Blinks when the Fast/Slow scan is activated.
• Low Battery 1: You should charge the battery. (blinks slowly)
• Low Battery 2: You must charge the battery. (blinks fast)
• TX low Battery 2: Very Low Battery was detected during
transmit.
• Channel Error: A non-programmed channel is selected.
* Lights (or blinks) orange when the optional battery case is attached.
• TX low Battery 1: Low Battery was detected during transmit.
