15
3
BASIC OPERATION
D
DTCS code setting
Ths transcever s equpped wth 84 DTCS codes and OFF.
DTCS operaton provdes communcaton wth slent standby snce
you wll only receve calls from group members usng the same
DTCS code.
q
Turn power OFF n advance.
w
Whle pushng and holdng
[PTT]
,
[Upper]
and
[Lower]
, rotate
[VOL]
to turn the power ON.
e
Rotate
[CH selector]
to select the desred channel (1 to 15) that
you want to assgn the DTCS code to.
r
Push and hold
[Lower]
untl a long beep s emtted.
t
Push
[PTT]
the necessary number of tmes to choose the 10
dgt of the desred DTCS code number (grey column) from the
lst at rght.
y
Push
[Upper]
.
• Confirmaton beep(s) s (are) emtted. (See the Confirmaton beep
lst on p. 14.)
u
Push
[PTT]
the necessary number of tmes to choose the 1 dgt
of the desred DTCS code number (grey column) from the lst at
rght.
i
Push
[Upper]
.
• Confirmaton beep(s) s (are) emtted. (See the Confirmaton beep
lst on p. 14.)
o
If you want to use
Inverse
mode, push
[PTT]
once more.
*You can skp ths step, f you want to use
Normal
mode.
!0
Push
[Upper]
to complete the settng.
• A short beep s emtted.
!1
Turn power OFF, then ON agan.
[Example]:
Code No. 16 (114) wth Inverse mode assgnment to
channel 5
q
Turn power OFF n advance.
w
Whle pushng and holdng
[PTT]
,
[Upper]
and
[Lower]
, rotate
[VOL]
to turn the power ON.
