Icom IC-F111, Инструкция по эксплуатации

Страница: 3 / 24

PRECAUTIONS
USE
the supplied microphone only. Other microphones have
different pin assignments and may damage the transceiver.
DO NOT
use or place the transceiver in areas with tem-
peratures below –22°F (–30°C) or above +140°F (+60°C), or
in areas subject to direct sunlight, such as the dashboard.
DO NOT
operate the transceiver without running the ve-
hicle’s engine. The vehicle’s battery will quickly run out if the
transceiver transmits while the vehicle’s engine OFF.
DO NOT
place the transceiver in excessively dusty envi-
ronments.
DO NOT
place the transceiver against walls. This will ob-
struct heat dissipation.
DO NOT
use chemical agents such as benzine or alcohol
when cleaning, as they damage the transceiver surfaces.
For U.S.A. only
CAUTION:
Changes or modifications to this transceiver, not
expressly approved by Icom Inc., could void your authority to
operate this transceiver under FCC regulations.
TABLE OF CONTENTS
ii
IMPORTANT .......................................................................... i
EXPLICIT DEFINITIONS ....................................................... i
PRECAUTIONS ..................................................................... i
TABLE OF CONTENTS ........................................................ ii
1 PANEL DESCRIPTION ................................................1–6
■
Front panel ...................................................................1
■
Function display ...........................................................2
■
Programmable function keys ........................................3
2 OPERATION ..............................................................7–10
■
Turning power ON ........................................................7
■
Channel selection .........................................................7
■
Receiving and transmitting ...........................................8
3 CONNECTION AND MAINTENANCE ....................11–15
■
Rear panel and connection ........................................11
■
Supplied Accessories .................................................12
■
Mounting the transceiver ............................................13
■
Optional UT-108 installation .......................................13
■
Optional UT-109 or UT-110 installation .......................14
■
Optional OPC-617 installation ....................................... 14
■
Antenna ......................................................................15
■
Fuse replacement ......................................................15
■
Cleaning .....................................................................15
4 OPTIONS .......................................................................16
5 SAFETY TRAINING INFORMATION .............................17
6 FCC INFORMATION ......................................................18