Icom IC-F111, Инструкция по эксплуатации

Страница: 2 / 24

IMPORTANT
READ ALL INSTRUCTIONS
carefully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL—
This
instruction manual contains important operating instructions
for the
IC-F111/F121 VHF TRANSCEIVERS
and
IC-F211/
F221 UHF TRANSCEIVERS
.
EXPLICIT DEFINITIONS
WORD DEFINITION
R WARNING
Personal injury, fire hazard or electric
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
PRECAUTIONS
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United states, the United King-
dom, Germany, France, Spain, Russia and/or other countries.
i
R WARNING! NEVER
connect the transceiver to an
AC outlet. This may pose a fire hazard or result in an electric
shock.
R WARNING! NEVER
connect the transceiver to a
power source of more than 16 V DC such as a 24 V battery.
This connection will ruin the transceiver.
R WARNING! NEVER
cut the DC power cable be-
tween the DC plug and fuse holder. If an incorrect connection
is made after cutting, the transceiver might be damaged.
R WARNING! NEVER
place the transceiver where
normal operation of the vehicle may be hindered or where it
could cause bodily injury.
CAUTION! NEVER
touch the transceiver (especially
the heat sink
) when transmitting continuously for long peri-
ods. It will become hot.
CAUTION! NEVER
allow children to touch the trans-
ceiver.
CAUTION! NEVER
expose the transceiver to rain,
snow or any liquids. The transceiver may be damaged.