Icom IC-A24 Скачать руководство пользователя страница 36

Страница: 36 / 40

OPTIONS

BATTERY CASE AND PACKS

• BP-208N

BATTERY CASE

Battery case for 6

AA (LR6) Alkaline cells.

• BP-209N

Ni-Cd

BATTERY PACK

7.2 V/1100 mAh Ni-Cd battery pack.

• BP-210N

Ni-MH

BATTERY PACK

7.2 V/1650 mAh Ni-MH battery pack.

• BP-211N

Li-Ion

BATTERY PACK

7.4 V/1800 mAh Li-Ion battery pack.

CHARGERS

• BC-110AR/DR/V

WALL CHARGER

The same as supplied with the transceiver.

•BC-119N

DESKTOP CHARGER

+ AD-101

CHARGER ADAPTER

+ BC-145

AC ADAPTER

For rapid charging of battery packs. An AC adapter is supplied with
the charger depending on versions. Charging time: approx. 1.5 to 2
hours.

•BC-121N

MULTI

CHARGER

+ AD-101

CHARGER ADAPTER

(6 pcs.)

+ BC-124

AC ADAPTER

For rapid charging of up to 6 battery packs (six AD-101’s are re-
quired) simultaneously. An AC adapter should be purchased sepa-
rately. Charging time: approx. 1.5 to 2 hours.

•BC-144N

DESKTOP CHARGER

For rapid charging of BP-209N (Ni-Cd) and BP-210N (Ni-MH).

BELT CLIPS

• MB-103

BELT CLIP

The same as supplied with the transceiver.

• MB-86

SWIVEL BELT CLIP

Belt clip for swivel type.

• MB-96F/96N

LEATHER BELT HANGER

➥

MB-96F: Attaches with the supplied belt clip (Fixed type).

➥

MB-96N: Belt hanger for swivel type.

DC CABLES

• CP-20

CIGARETTE LIGHTER CABLE

➥

Charges the battery pack through a cigarette lighter socket*.

➥

Operates IC-A24/A6 through a cigarette lighter socket*.

*Both 12 V and 24 V batteries are available.

• OPC-656

DC POWER CABLE FOR

BC-121N

Charges the battery pack using 13.8 V power source instead of the
AC adapter for BC-121N.

OTHER OPTIONS

• OPC-499

HEADSET ADAPTER CABLE

When using an optional headset (3rd party products) via the
adapter, the transceiver outputs your transmitted voice to the head-
set for monitoring.

• LC-159

CARRYING CASE

Helps protect the transceiver from scratches, etc.

Different versions of this radio use different options. Ask
your authorized dealer for details.

IC-A24_A6-5.qxd 2007.04.23 4:32 PM Page 32

Содержание IC-A24









































Результаты поиска

Содержание IC-A24

Отзывы:

Icom IC-A24, Инструкция по эксплуатации, Страница: 36 / 40

Результаты поиска

Содержание IC-A24

Отзывы: