Icom IC-A24 Скачать руководство пользователя страница 31

Страница: 31 / 40

BATTERY PACKS

Regular charging

Attach the battery pack to the transceiver.

Be sure to turn the transceiver power OFF.

Connect the Wall charger or optional cable (CP-20) as
shown below.

Charging the battery pack approx. 8 hours, depending on
the remaining power condition.

DO NOT

charge BP-210N more than 12 hours. Otherwise,

BP-210N will be damaged. BP-210N must be charged for
8–12 hours only.

■

Optional battery case

When using a battery case attached to the transceiver, install
6

AA (LR6) size Alkaline batteries as illustrated below.

Remove the battery case from the transceiver.

Install 6

AA (LR6) size Alkaline batteries.

• Be sure to observe the correct polarity.

CAUTION:

• When installing batteries, make sure they are all the same

brand, type and capacity. Also, do not mix new and old
batteries together.

• Keep battery contacts clean. It’s a good idea to clean bat-

tery terminals once a week.

Wall charger

To [DC 11V]

IC-A24/A6 with the

attached battery pack

CP-20 (for 11 24 V)

(optional)

To the cigarette

lighter socket

Turn power OFF

CAUTION !

•

DO NOT

modify the CP-20. A modifica-

tion could cause a fire or electrocution.

•

BE CAREFUL

not to cut or fray the

CP-20’s power cable when disconnect-
ing/connecting the CP-20 from/to the
cigarette lighter socket.

IC-A24_A6-5.qxd 2007.04.23 4:32 PM Page 27

Содержание IC-A24









































Результаты поиска

Содержание IC-A24

Отзывы:

Icom IC-A24, Инструкция по эксплуатации, Страница: 31 / 40

Результаты поиска

Содержание IC-A24

Отзывы: