Icom IC-A220T Скачать руководство пользователя страница 27

Страница: 27 / 40

External input level

“AUX LEVEL”

Sets the external input level.

• OFF (0): The external input is disabled.

• 001 to 080: Sets the external input level to between 1 and 80.

• AF GAIN: Interlocked with [VOL].

Beep tone level

“BEEP”

Confirmation beep tones normally sound when storing

memory, operating the time-out-timer function, and so on.

• OFF (0): The beep tone is OFF.

• 001 to 100: Sets the beep tone level to between 1 and 100.

NOTE:

When using an external speaker and the squelch

is closed, the beep tone level is fixed and cannot be

changed in the Settings menu.

Frequency step

“FREQ. STEP”

Selects the frequency step: 8.33 kHz or 25 kHz.

• 25kHz:

Sets the frequency step is set to 25 kHz.

• 8.33kHz: Sets the frequency step is set to 8.33 kHz.

MENU MODE

Setting microphone 1 Gain

“MIC1 GAIN”

Sets microphone 1’s gain.

• –010 to 010: Sets the microphone 1’s gain to between –10 and 10.

Setting microphone 2 Gain

“MIC2 GAIN”

Sets microphone 2’s gain.

• –010 to 010: Sets the microphone 2’s gain to between –10 and 10.

Sidetone level “

SIDETONE LV

”

When using an optional headset (user supplied) through an

adapter, the transceiver sends your transmitted voice to the

headset for monitoring.

*Ask your dealer in details.

• OFF (0):

The sidetone function is OFF.

• 001 to 080: Sets the sidetone level to between 1 and 80.

Manual dimmer control

“DISP MAN”

Sets the brightness manually to suit your own preferences.

• OFF:

The display brightness is set to the minimum. The

key backlight is OFF.

• 001 to 100: Sets the dimmer level to between 1 and 100.

Frequency display “

FREQ DISP

”

Sets the 1 kHz digit frequency displaying on the OLED.

• OFF :

The 1 kHz digit is not displayed on the OLED.

• ON :

The 1 kHz digit is always displayed on the OLED.

• ZERO SUPP.: The 1 kHz digit is displayed only when the 1 kHz

digit frequency is 5 kHz.

CAUTION:

In Canada, use of 8.33 kHz Channel

Spacing of this radio is strictly prohibited and shall not be

used.

Содержание IC-A220T









































Результаты поиска

Содержание IC-A220T

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-A220T, Инструкция по эксплуатации

Результаты поиска

Содержание IC-A220T

Отзывы:

Бренды по названию

Популярные бренды