Icom IC-A220T, Инструкция по эксплуатации

Страница: 16 / 40

9
3
MEMORY OPERATION
D
Clearing the memory contents
You can clear unwanted memory channels.
q
Push [RCL] to enter the memory mode.
• The memory channel number is displayed.
• The memory channel name is also displayed if it has been
entered.
w
Rotate [O-DIAL] to select a memory channel.
• Select a regular memory channel or a group memory channels.
• For the group memory channel, push [DIAL] and then rotate
[O-DIAL] to select a group.
e
Rotate [DIAL] to select a channel.
r
Push [MEM] and then rotate [O-DIAL] to select “DELETE.”
• The channel number blinks.
• For the group memory channel, push [DIAL], [MEM] and then
rotate [O-DIAL] to select “DELETE.”
CH01
127.000
127.000
122.00
MEMORY
ÅDELETE Ç
t
Push [MEM] to clear the memory channel data.
CH01
122.00
MEMORY
y
Push [RCL] to exit the memory mode.
D
Enter frequencies into memory channels
To enter frequencies into memory channels, follow the steps
below.
q
Rotate [DIAL] and [O-DIAL] to set the standby frequen -
cy.
w
Push [RCL] to enter the memory mode.
• The memory channel number is displayed.
• The memory channel name is also displayed if it has been
entered.
e
Rotate [O-DIAL] to select a memory channel.
• Select a regular memory channels or a group memory
channels.
• For the group memory channel, push [DIAL] and then rotate
[O-DIAL] to select a group.
r
Push [MEM] and then
rotate [O-DIAL] to select
“REPLACE.”
• The channel number blinks.
• For the group memory channel, push [DIAL] , [MEM] and then
rotate [O-DIAL] to select
“REPLACE.”
t
Rotate [DIAL] to select a
channel to be entered.
y
Push [MEM] to enter the frequency into the channel.
• “WRITE COMPLETED” is displayed when the regular memory
channel is entered.
u
Push [RCL] to exit the memory mode.
CH01
128.000
127.000
122.00
MEMORY
REPLACE Ç
CH02
128.000
127.000
122.00
MEMORY
REPLACE Ç