2
1
PANEL DESCRIPTION
■
Front panel (Continued)
t
MEMORY SWITCH [MEM]
Hold down for 2 seconds to program a displayed fre-
quency to any blank regular memory channel or delete/
revive the selected memory channel (depending on the
operating mode) (p. 9).
y
RECALL SWITCH [RCL]
➥
Push to enter/exit the memory mode (p. 9).
➥
Hold down for 2 seconds to enter the menu mode
(p. 22).
u
LIGHT-SENSITIVE DETECTOR
This detector senses ambient light. The detector is used
to adjust “Dimmer brightness (Low/High)” (p. 25) auto-
matically when the “Dimmer Mode” (p. 25) is set to ‘AUTO.’
i
INNER (Small) TUNING DIAL [DIAL]
➥
Rotate to set the standby frequencies (kHz digit)
(p. 5), memory channels (p. 10), MENU mode settings
(p. 22).
➥
Hold down for 2 seconds to turn the dial/panel lock
function ON (p. 19).
o
OUTER (Large) TUNING DIAL [O-DIAL]
➥
Rotate to set the standby frequency (MHz digit) (p. 5),
group memory channel (p. 13), cursor position (p. 15),
etc.
➥
Rotate to change the scan direction while scanning
(p. 21).
RCL
MEM
OFF
VOL
PUSH
TEST
COMM
DUAL
EC
iA210
CH09 SAMPLE
121.52
5
118.00
RX
MEMORY
e
y
t
r
i
o
u
q
w
