background image

20

4

OTHER FUNCTIONS

 Intercom function

When two headphone and microphone jacks are connected 
to the transceiver, these headsets can be used as a voice-
activated intercom.

q

  Enter to the MENU mode.

  • See page 22 for details.

w

  Set Intercom Usable Setting to ON.

  • See page 27 for details.

e

  Exit from the MENU mode.

  • See page 22 for details.

r

  Hold down 

[DUAL] for 2 seconds to enable the intercom 

function.

  • “ICS” appears.

•  The headphone audio output level can be selected 

“OFF,” “output level fixing (001 to 080)” or “interlocking 
with [VOL]” in the MENU mode (p. 23).

•  The microphone1 and microphone2 audio input levels 

can be also selected “OFF” or “output level fixing (001 to 
080)” in the MENU mode (p. 23).

 Squelch test function

This function opens the squelch manually for testing.

q

  Push 

[VOL] to turn the squelch test function ON.

  • “TEST” appears.

w

  To turn the function OFF, repeat step 

q

 as above.

  • “TEST” disappears.

  

Frequency step setting

Frequency step (8.33 kHz or 25 kHz) is selectable in the 
menu mode.

q

  Enter the menu mode (See page 22 for details).

w

  Rotate 

[O-DIAL] to select the “FREQ. STEP (Frequency 

step).”

e

  Rotate 

[DIAL] to select the desired frequency step  

(8.33 kHz or 25 kHz).

 Push 

[RCL] to exit MENU mode, and returning to the pre-

vious operating condition.

Содержание IC-A210









































Отзывы: