background image

28

7

BATTERY PACKS AND CASE

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

D

 Rapid charging with the BC-121N+AD-106

The optional BC-121N allows up to 6 battery packs to be  
simultaneously charged. The following are additionally re-
quired.

• Six AD-106 charger adapters.
• A power adapter (BC-157S) or the DC power cable (OPC-656).

 

 Battery  case   

(optional for some versions)

D

 Precaution

NEVER

 incinerate used batteries since internal battery gas 

may cause them to rupture.

NEVER

 expose a detached battery case to water. If the bat-

tery case gets wet, be sure to wipe it dry before using it.

NEVER 

short the terminals of the battery case. Also, cur-

rent may flow into nearby metal objects, such as a necklace, 
etc. Therefore, be careful when carrying with, or placing near 
metal objects, carrying in bags and so on.
When installing batteries, make sure they are all the same 
brand, type and capacity. Also, do not mix new and old bat-
teries together.
Install conventional alkaline batteries only. Other type of bat-
teries, such as Ni-Cd, Ni-MH, Li-ion, are cannot be used.
Remove the alkaline batteries when leaving the battery case 
unused for long time.
Keep battery contacts clean. It’s a good idea to occasionally 
clean the battery terminals.
Alkaline batteries have a shorter operating time compared 
to Li-ion batteries. Also, the operating time differs by brand, 
as well as the model type of the alkaline battery being used. 
Therefore, it is recommended that you use the Li-ion battery 
pack, or take spare alkaline batteries with you when intending 
to use the transceiver frequently, or for long periods.

Battery
pack

AD-106 charger
adapters are installed
in each slot.

Power adapter
(User supplied)

Transceiver

Turn OFF power

OPC-656 DC power 
cable (Connect with 
a DC power supply, 
13.8 V/at least 7 A)

Red line : 

+

  

Black line : 

_

IMPORTANT!:

Ensure  the  guide  tabs 
on the battery pack are 
correctly  aligned  with 
the  guide rails  inside 
the charger adapter.

Guide rails

Tabs

Содержание IC-A15













































Отзывы: