Icom IC-7800 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 206

Icom IC-7800 Скачать руководство пользователя страница 80

4-32

■

Repeater operation

A repeater amplifies received signals and retransmits
them at a different frequency. When using a repeater,
the transmit frequency is shifted from the receive fre-
quency by an offset frequency. A repeater can be ac-
cessed using split frequency operation with the shift
frequency set to the repeater’s offset frequency.

For accessing a repeater which requires a repeater
tone, set the repeater tone frequency in tone fre-
quency set mode as described below.

q

Set the offset frequencies (HF, 50 MHz) and turn
ON the quick split function in miscellaneous (others)
set mode in advance. (p. 12-15)

w

Push [V/M] to select VFO mode.

e

Push the desired band key.

r

Push [AM/FM] several times to select FM mode.

t

Set the receive frequency (repeater output fre-
quency).

y

Push [SPLIT] for 1 sec. to start repeater operation.

• Repeater tone is turned ON automatically.
• [SPLIT] indicator lights and “

” appears on the

LCD.

• Shifted transmit frequency and “TX” appear in the sub

band.

• The transmit frequency can be monitored while pushing

[XFC] or using dualwatch.

u

Push and hold [PTT] to transmit; release [PTT] to
receive.

i

To return to simplex, push [SPLIT] momentarily.

D

D

Repeater tone frequency setting

Some repeaters require subaudible tones to be ac-
cessed. Subaudible tones are superimposed over your
normal signal and must be set in advance. The trans-
ceiver has 50 tones from 67.0 Hz to 254.1 Hz.

q

Select FM mode.

w

Push [TONE] for 1 sec. to tone frequency set mode.

e

Push [F-1•

Y

] or [F-2•

Z

] to select REPEATER

TONE item.

r

Rotate the main dial to select the desired repeater
tone frequency.

• Push [F-4•DEF] for 1 sec. to select the default setting.

t

Push [EXIT/SET] to return to the previous indica-
tion.

• Available tone frequencies

(unit: Hz)

[AM/FM]

[F-1•

Y

] [F-2•

Z

]

Main dial

[F-4•DEF]

[TONE]

[V/M]

[AM/FM] [XFC]

[SPLIT]

Main dial

Band keys

[SPLIT] indicator

4

RECEIVE AND TRANSMIT

67.0
69.3
71.9
74.4
77.0
79.7
82.5

0

85.4

0

88.5

0

91.5

0

94.8

0

97.4

100.0
103.5

107.2

110.9
114.8
118.8

123.0
127.3
131.8

136.5
141.3
146.2
151.4
156.7
159.8
162.2

165.5
167.9
171.3
173.8
177.3
179.9
183.5

186.2
189.9
192.8
196.6
199.5
203.5
206.5

210.7
218.1
225.7
229.1
233.6
241.8
250.3

254.1

«
...
78
79
80
81
82
...
»

Содержание IC-7800















































































































































































































Отзывы:

Нет отзывов